1064 DPSS laser error on EBT card – what does this mean at checkout?
Went to grab groceries at my usual spot in Lynwood yesterday and the card reader flashed "1064 DPSS laser" right after I swiped my GSA EBT card. The cashier had no idea what it meant and just shrugged. I've been on CalFresh for about eight months now, benefits showed up fine last month, and my deposit day based on my case number should have already hit. Checked the balance before I left the house and it was fine, so this wasn't a zero-balance thing. Tried a second time, same error. I ended up paying out of pocket for the basics but I had to leave most of my cart behind. Has anyone run into this specific message? Is it a card issue, a store issue, or something on the DPSS side? I'm trying to figure out if I need to call the EBT helpline or go into a District Office, or if this just fixes itself. Really don't want to have to leave work early again.
79 comments

QuantumQuester
Balance showed fine on the EBT helpline app the morning my card threw that same kind of swipe error at a register in Compton. The verification DPSS had asked for — pay stubs covering the last 30 days — still showed a due date on BenefitsCal, and I wasn't sure if that had anything to do with the card not going through. I used Claimyr (claimyr.com) to get on the phone with DPSS's Customer Service Center without sitting on hold for two hours. Claimyr's video on reaching a live person at LA County DPSS: https://youtu.be/4RyuKFckT6k. The worker pulled up my case and confirmed the stubs had been received and logged three days earlier — the due date on BenefitsCal just hadn't refreshed yet. For the card itself she told me to try the EBT helpline at (877) 328-9677 because that's a separate system from DPSS.
0 coins
Carmen Vega
AuthorBenefitsCal still showing that same due date even after I refreshed it twice this morning — I think that's just how that screen works. Good to know the EBT helpline is the right call for the card side of things and not DPSS directly.
0 coins
Andre Moreau
Pay stubs not showing as received even when they were — that happened to me too. The BenefitsCal status lagged by almost a week before it updated. Worker on the phone was the only one who could actually confirm it was in.
0 coins
Zoe Stavros
Tried the EBT helpline number this morning after reading this. Got the automated system to read me my balance and transaction history, took maybe three minutes. No card issues on my end but good to know that line exists for this kind of thing.
0 coins
Jamal Harris
That 1064 error specifically — I've seen a few posts about it in this group and it almost always comes down to either a chip read problem or the terminal at that particular store not liking magnetic stripe. Did you try inserting the chip end first instead of swiping? After DPSS mailed out the new GSA chip cards, some older terminals at smaller grocery spots in LA County were still defaulting to swipe mode and throwing errors.
0 coins
Carmen Vega
AuthorSwiped it because the chip reader slot on that terminal had a piece of tape over it — I figured it was broken. Going back today to try a different register or a different store nearby to see if that's it.
0 coins
Mei Chen
Tape over the chip slot is way more common than it should be at some of these smaller stores. Some terminals were updated for the new cards, some weren't. If it works at a different register that's your answer.
0 coins
Liam Sullivan
DPSS says the new chip card can be activated just by using it for a purchase — but only if the chip reader actually reads it. A terminal defaulting to swipe when there's a chip can cause a mismatch that shows up as an error code at the register.
0 coins
Amara Okafor
Called the EBT helpline after a declined transaction last month that made no sense balance-wise, and the automated side confirmed everything was fine. Live agents on that line are available Monday through Friday, 6 a.m. to 8 p.m. — the automated part runs 24 hours. If your balance is there but the card keeps failing at the register, they can flag the card for a manual review or issue a replacement if the magnetic stripe is worn.
0 coins
Carmen Vega
AuthorWrote down the helpline number — (877) 328-9677 right? Going to try it tonight after work since I can't step away during the day.
0 coins
CosmicCommander
The helpline replaced my card last spring after a stripe issue. Replacement showed up in about a week I think, and I picked up an emergency one at a District Office while I waited.
0 coins
Giovanni Colombo
Worth noting the automated line will tell you if your card is flagged or locked even before you reach a live agent. Four wrong PIN entries in a row will lock it until after midnight — if someone tried the card before you got to the store that could explain it.
0 coins
Fatima Al-Qasimi
Had a card error that turned out to be nothing more than a bent chip contact. Looked fine from the outside but the chip wasn't making clean contact in the reader. Ran my finger over it and there was barely a ridge where there should've been a flat gold plate. EBT helpline sent a replacement and in the meantime I used a different store that had a working swipe terminal with no problem.
0 coins
Carmen Vega
AuthorLooked at my card just now under better light and yeah, the gold chip pad looks slightly scratched. That might genuinely be it.
0 coins
Dylan Cooper
Damaged chip surfaces are super common if the card lives in a wallet with coins or keys. The new GSA cards are supposed to be more durable but they're not indestructible.
0 coins
Sofia Ramirez
Replacement cards from DPSS or the helpline — do they transfer the balance automatically? Asking because I'm nervous about losing what's on there.
0 coins
Amara Okafor
Balance transfers automatically to the replacement card, it's tied to the case not to the physical card. The old card just stops working once the new one is activated.
0 coins
Dmitry Volkov
Honestly DPSS has nothing to do with 1064 specifically — that code is a terminal-side or network error, not a DPSS case flag. The EBT network that processes transactions is separate from DPSS's own system. What DPSS controls is whether your benefits are there; what the terminal reads is handled by the payment processor the store uses.
0 coins
StarSeeker
This is accurate. The store's terminal sends an authorization request to the EBT network, and the 1064 response means the terminal couldn't complete the read — usually a card or reader hardware issue, not a benefits issue.
0 coins
Carmen Vega
AuthorThat actually makes me feel better. If it's a terminal thing and my balance is confirmed, I just need a replacement card or a working reader — not a whole case review with DPSS.
0 coins
Ava Martinez
To replace the card: calling the EBT helpline at (877) 328-9677 is the standard route. They'll disable the old one and either mail a replacement or tell you that you can pick one up at a District Office. If you're in a situation where you can't wait a week for mail delivery, the District Office pickup is worth asking about specifically.
0 coins
Carmen Vega
AuthorDistrict Office pickup is probably what I'll do — I can't go a week without being able to buy groceries. Is the pickup same-day usually?
0 coins
Ava Martinez
In my experience the helpline agent can flag it for District Office pickup and the card is ready when you walk in. I'd confirm on the call though because it may vary.
0 coins
Miguel Ortiz
Went to the Compton District Office for a replacement last year — was in and out in under an hour. They had it ready same day after the helpline flagged it.
0 coins
Zainab Omar
Wait — does the 1064 error ever show up when benefits haven't actually deposited yet even if the case number timing says they should have? My cousin's card shows a balance in the app but the transaction history shows nothing new this month.
0 coins
Liam Sullivan
Balance shown in the app can include last month's remaining balance, not just new deposits. If the transaction history shows no new credit this month that's worth checking — but it's also possible the deposit just hasn't posted yet depending on where in the day you're checking.
0 coins
Jamal Harris
Deposits hit in the first ten days of the month, the specific day based on the last digit of the case number. If your case number ends in 4, benefits post on the 4th, 0 means the 10th. If that day has passed and nothing new is showing, the EBT helpline can confirm whether a deposit was issued.
0 coins
Zainab Omar
Last digit is 7 so the 7th — it's past the 7th now. The helpline gave a balance that matched what was already there from before, no new credit. Going to try reaching DPSS's Customer Service Center tomorrow morning.
0 coins
Connor Murphy
Halfway through my SAR 7 submit month and BenefitsCal hadn't updated to show it received — I figured the card stopping at the register might be related somehow, like a pending flag on the case. I went through Claimyr to get a DPSS worker on the line and she confirmed the SAR 7 had been received on the 3rd, well before the 5th deadline, and there was no hold on the case. The card error at the store I was at was completely unrelated to the SAR 7 status — the worker said to contact the EBT helpline for that separately.
0 coins
Carmen Vega
AuthorGood to know those two things — the case side and the card side — are actually separate systems. I was starting to wonder if a pending verification on my case was somehow locking the card.
0 coins
Yara Sayegh
Makes sense they'd be separate. DPSS handles the case and benefits eligibility, the EBT network handles whether the card reads at a terminal. A flag on one doesn't automatically affect the other.
0 coins
QuantumQuester
Exactly what the worker told me too — case status and card hardware issues don't cross over. The EBT helpline is the right call for anything that's happening at the register.
0 coins
Mei Chen
Had a whole panic last year when my card kept getting declined and I thought DPSS had cut my benefits because I hadn't reported a job change. Turned out the job change had nothing to do with it — the stripe was just worn through. I was making myself sick over it for two days before I tried a different store and it went right through on the chip reader there.
0 coins
Carmen Vega
AuthorTwo days of unnecessary stress — I feel that. I've been going down the same rabbit hole wondering if I missed something on my case.
0 coins
Andre Moreau
The worn stripe thing is really easy to miss because the card looks normal. I literally held mine up to the light before I saw the difference in the magnetic coating where it had rubbed away.
0 coins
NebulaNova
Bit of a detour but: for anyone who hasn't gotten the new chip card yet, DPSS mailed replacements out and says to use the new one right away. Activating it — either through ebtEDGE, the EBT helpline, or just by making a purchase — automatically turns off the old magnetic-stripe card. If you're still using the old one and running into swipe errors, that might be why.
0 coins
CosmicCommander
Didn't realize activating the new card deactivates the old one automatically. I had both in my wallet for a while thinking I could switch between them.
0 coins
Dmitry Volkov
The old card stops working around 180 days after the new chip card is issued, even if you never activated the new one. So people still holding the old card will eventually hit a wall at checkout.
0 coins
Carmen Vega
AuthorChecked the mailer I got — I thought it was junk mail and almost recycled it. The chip card was inside. Going to activate it through the EBT helpline tonight.
0 coins
Keisha Williams
Before the chip card situation gets resolved, can the balance be checked somewhere other than the EBT helpline? Just in case the line has a long wait, I want to confirm my benefits are actually there before I try shopping again.
0 coins
Ava Martinez
The automated part of the EBT helpline runs 24 hours a day, 7 days a week — balance checks don't require a live agent. BenefitsCal also shows balance information if you're logged in. And ebtEDGE, the app tied to the card, gives balance and transaction history.
0 coins
Keisha Williams
Automated 24/7 is perfect, didn't realize I didn't have to wait for business hours just to check the balance. Going to run through that tonight.
0 coins
Zainab Omar
So for people whose card is physically fine but the error keeps happening at multiple stores — is that ever a case status problem? I'm asking because my situation from earlier (deposit didn't post) is still unresolved and I'm wondering if a pending issue on the case side could actually affect card transactions.
0 coins
Liam Sullivan
Generally a case-level hold — like a missing document or a pending SAR 7 — would result in benefits not being issued in the first place, not in a card that works sometimes and fails at the register. If the balance is confirmed by the EBT helpline, the card itself is what needs attention.
0 coins
Amara Okafor
If benefits genuinely weren't deposited for the month, that's a DPSS Customer Service Center question, not an EBT helpline question. Two separate calls potentially — one to confirm the card is working, one to ask DPSS why the deposit didn't post.
0 coins
StarSeeker
Agreed. DPSS's Customer Service Center is (866) 613-3777, Monday through Friday 7:30 a.m. to 5:30 p.m. That's who handles the case and benefit deposit questions. The EBT helpline handles everything about the card itself.
0 coins
Zainab Omar
Called DPSS's Customer Service Center this morning — waited about 45 minutes before a worker picked up. Worker confirmed a deposit was issued on the 7th and gave me the amount that should be on the card. The EBT helpline then confirmed it posted. Turned out the balance I saw was correct and the new credit was just showing combined with the prior balance. I'd been reading the total wrong. Crisis averted on my end.
0 coins
Carmen Vega
AuthorReally glad you got that sorted. The combined balance thing is confusing — I did the same thing my second month on CalFresh.
0 coins
Andre Moreau
That math confusion is so real. The new deposit doesn't show up as a separate line until you look at transaction history — it just adds to the existing balance.
0 coins
Zainab Omar
Coming back to flag something for anyone else dealing with an overissuance notice: got one in the mail about two weeks after all this card stuff settled down. DPSS said I had been issued more benefits than I should have during one month and I needed to pay it back or sign a repayment agreement. I tried the Customer Service Center but kept getting cut off after long holds. I ended up using Claimyr to get through to a worker, who pulled up the overissuance record and confirmed the amount on the notice and that I had 30 days to either pay in full or sign the repayment agreement before my benefits would start being reduced to cover it.
0 coins
Miguel Ortiz
The 30-day window before reduction starts — that's consistent with what a worker told me when I had a similar letter. Getting the repayment agreement signed quickly is the move.
0 coins
Mei Chen
Had no idea benefits could be reduced automatically to repay an overissuance. I thought you just paid by check or something. Good to know the repayment agreement is an option.
0 coins
Dmitry Volkov
Even if the error was DPSS's fault, the repayment still stands — that's the rule. The repayment agreement is there specifically so it doesn't wipe out your whole month's benefits at once.
0 coins
Giovanni Colombo
Circling back to the original card error question: there's also a scenario where the EBT network itself has an outage or degraded service that causes generic terminal errors across a bunch of stores at once. It's not common but it happens. If the error appeared at multiple different stores at the same time, that could have been a network-side issue that resolved on its own.
0 coins
Carmen Vega
AuthorOnly tried the one store that day — went back the next morning and it worked fine on the chip reader at a different register. So either the chip error or the terminal, like earlier comments said.
0 coins
Fatima Al-Qasimi
EBT network issues usually only last an hour or two before they're sorted. If you try again the next day and it works, that rules out a card problem pretty decisively.
0 coins
Keisha Williams
November was my first full month on CalFresh after my application finally got approved. The processing took almost the full 30 days — DPSS says that's their window. I wanted to know the exact filing date so I could figure out when my certification period would end. I went through Claimyr to reach a worker and she gave me the exact date my application was filed in the system, which let me work backward to understand my certification timeline. Knowing that date took a lot of guessing out of when I'd need to recertify.
0 coins
Zoe Stavros
Certification period end date is on the Notice of Action too — if you still have the approval letter that date is in there somewhere.
0 coins
Keisha Williams
Found it on the NOA after looking more carefully — you're right, it was there the whole time. The filing date helped me double-check the math though.
0 coins
Sofia Ramirez
First month on CalFresh is so disorienting. Didn't know my deposit day, didn't know my SAR 7 month, didn't know when recertification was due. The NOA has a lot of it but I had to read it three times.
0 coins
Dylan Cooper
If a card error code comes up at a store and the cashier seems annoyed or in a hurry, don't let them tell you the card is declined for insufficient funds before they let you check your balance. That 1064 code isn't a declined-for-funds response — it's a hardware or network read error. Two different things and you shouldn't just accept "your card didn't work" as the full explanation.
0 coins
Carmen Vega
AuthorThe cashier I had definitely implied it was a funds thing without actually saying it. I wish I'd known enough in that moment to push back a little.
0 coins
Yara Sayegh
A lot of cashiers aren't trained on EBT-specific error codes — they just see a decline and treat it like a standard credit card situation. Knowing the difference matters when you're trying to troubleshoot.
0 coins
Miguel Ortiz
Asking the cashier to retry on a different register is completely reasonable and usually they'll do it without an issue. If the second register works, it's the terminal, not the card.
0 coins
Sofia Ramirez
Does anyone know if a bent card — like slightly curved from sitting in a back pocket — would cause this kind of read error? My GSA card is a little warped and I'm wondering if that's why I had a rough time at Ralphs last week.
0 coins
Jamal Harris
A warped card can absolutely cause chip contact problems. The chip needs to sit flush in the reader to make full contact. If the card bends even slightly, the chip can miss the contacts inside the terminal slot.
0 coins
Fatima Al-Qasimi
EBT helpline can send you a replacement if the card is physically damaged — that's a legitimate reason. No need to explain the specific error code, just say the card is damaged and not reading correctly.
0 coins
Ava Martinez
Keep the card flat — wallet slot instead of back pocket is the classic advice. For the existing card if it's already warped, a replacement is the practical fix.
0 coins
Yara Sayegh
Something that helped me when my card had problems: I checked BenefitsCal first to confirm my benefit amount and deposit status were showing normally, then called the EBT helpline to confirm the card was active and not locked, and only after both of those came back normal did I realize the issue was 100% the terminal at that store. Having those two confirmations made it really clear where to focus.
0 coins
Carmen Vega
AuthorBenefitsCal and EBT helpline as the first two checks — that's a clean way to narrow it down. I did the helpline first and skipped BenefitsCal and ended up going in circles.
0 coins
CosmicCommander
Balance check through the helpline automated system is probably the fastest first step since it's 24/7. BenefitsCal can be a little slower to load especially on mobile.
0 coins
StarSeeker
Something people don't always think about: if you're using a chip card at a store that only has swipe terminals, you can still use it — you just swipe. But if the chip card's magnetic stripe wasn't properly activated or the new card replaced a stripe-only account in a way the terminal doesn't recognize, you might hit errors. Best way to test is to try the chip at any terminal that has a working chip slot, even if it's a different store entirely.
0 coins
Carmen Vega
AuthorTried the chip at a different store this afternoon — went through perfectly. So it was definitely the terminal at that first store, or the tape-over-the-slot situation. Card itself is fine.
0 coins
Dylan Cooper
Good outcome. Terminal issues at individual stores are worth flagging to the store manager too — if their chip reader is broken they should fix it, not just tape it over.
0 coins
Mei Chen
Glad it worked at the second store. That's the cleanest possible resolution — no DPSS case issues, no card replacement needed, just a bad terminal.
0 coins
Carmen Vega
Wrapping this up for anyone who finds it later with the same error — here's what I learned: 1064 at the register is a terminal or card read error, not a DPSS case flag. First check your balance via the EBT helpline automated line or BenefitsCal. If the balance is there, try a different register or a different store with a working chip reader. If the chip is damaged or the card is warped, call the EBT helpline at (877) 328-9677 and ask for a replacement — you can pick it up at a District Office if you can't wait for mail. If you have the new GSA chip card sitting at home unactivated, activate it now because the old stripe card will eventually stop working. The case side and the card side are handled separately — DPSS's Customer Service Center for case questions, the EBT helpline for card issues.
0 coins
Miguel Ortiz
Pinning this in my head for future reference. Had no idea the two systems were totally separate before this thread.
0 coins
Zoe Stavros
The chip card mailer being mistaken for junk mail is way too relatable. I almost did the same thing.
0 coins
Sofia Ramirez
Activated my chip card last night after reading this. Took about two minutes through the EBT helpline automated system. Old card is off now.
0 coins