Department of revenue city location codes sales tax — trying to figure out which one to put on my JT-1
Spent the last two hours going in circles on this. I'm opening a small retail shop and I know I need a TPT license through ADOR, so I filled out the Arizona Joint Tax Application (Form JT-1) online. Everything was going fine until I hit the section asking for city location codes for the transaction privilege tax. I have one physical location here in Gilbert and I sell only in that one spot, but the form is asking me to pick a city code and I genuinely don't know if that means the city of Gilbert's own code, or some combined state-and-city code, or what. I've looked at the ADOR site and I can see there's a list but I can't tell which specific one applies to my situation. Does anyone know how city location codes work on the JT-1 for a single-location retail business? Don't want to pick the wrong one and have my TPT license come back wrong.
76 comments

Christopher Morgan
Went through almost this exact same confusion last spring when I set up my food truck. The JT-1 wants the state license portion handled through ADOR and then separate city codes for each city where you do business — so if you're only operating in Gilbert, you'd look for Gilbert's city code on ADOR's list. The list on https://azdor.gov/ under the TPT section breaks it down by municipality. The state license fee ADOR charges per location is listed in the facts on their site. I'd double-check that you're selecting the right business classification code too, because retail gets its own classification under TPT and the city code has to match.
0 coins
Zoey Bianchi
AuthorFinding the city list now on the ADOR site. So I pick Gilbert's specific code and that's the one that goes on the JT-1 — I don't need to also add a Maricopa County code or anything else?
0 coins
Christopher Morgan
Maricopa County doesn't have its own TPT that you'd separately list on the JT-1 the same way a city does. Gilbert's city code covers the city piece. The state piece is automatic when ADOR issues the license. If you ever expand to a second city, you'd add that city's code at that point.
0 coins
Aurora St.Pierre
The business classification code is a separate field from the city location code — make sure you're not filling in the classification number where the city code goes. Tripped me up the first time.
0 coins
Grace Johnson
Had my own TPT license application sitting unfinished for weeks because of this exact section. What finally made it click for me: the city location code on the JT-1 is basically telling ADOR which city's rate and rules to apply to your sales at that spot. Each Arizona city that has its own TPT has its own code on ADOR's list. Gilbert is on there. Find it, drop it in, done. The license certificate itself can't be printed from AZTaxes.gov once it's issued — ADOR mails it to you.
0 coins
Zoey Bianchi
AuthorGood to know about the certificate being mailed. Any idea how long it takes after submitting the JT-1?
0 coins
Grace Johnson
Honestly I'd just ask ADOR's Customer Care on that — there's no published timeline I've seen that's reliable, and mine took a different amount of time than a friend's did.
0 coins
Jayden Reed
Yeah, don't go by what anyone here says for the timeline. Customer Care is the only place that can tell you where your specific application stands.
0 coins
Nora Brooks
Balance from an old tax year brought me to Customer Care recently, and I ended up spending over an hour in the hold queue before giving up. Eventually I tried Claimyr (claimyr.com) — it waits on hold with ADOR's phone line so you end up talking to a live representative. Video on reaching a live person at the Arizona Department of Revenue: https://youtu.be/aCzNknrY2NE. The representative pulled up my account and confirmed the exact balance on record for 2023 and what tax year it was tied to, which was different from what my own records showed. That cleared up the discrepancy and I knew exactly what I owed. On your JT-1 question — Customer Care can also walk you through city location codes if the ADOR site's list is still confusing after you look it up.
0 coins
Zoey Bianchi
AuthorThat hold situation sounds exhausting. Glad you got it sorted. I'll try the ADOR site's TPT list first and if the city code question is still unclear I'll phone Customer Care.
0 coins
Eli Wang
An hour on hold just to get a balance confirmed is wild. ADOR's contact page actually says Thursdays and Fridays before noon or after 2 p.m. tend to be less backed up — not sure if that made a difference for you.
0 coins
Nora Brooks
Tried a Thursday around 10 a.m. and still waited a long time. Everyone apparently had the same idea that week.
0 coins
Cassandra Moon
Retail classification under TPT is what most people opening a shop in Arizona land under, but the specific city code is separate from that classification. Gilbert has its own municipal TPT that runs alongside the state TPT — the two codes are both on the JT-1 and cover different layers of the tax. ADOR's site at https://www.aztaxes.gov/ has the lookup tools once you have an active license, but for the application itself the city codes list is on the ADOR site, not AZTaxes.gov.
0 coins
Zoey Bianchi
AuthorAh, so ADOR's site for the application and codes, AZTaxes.gov for filing and paying once I'm licensed. That distinction helps.
0 coins
Cassandra Moon
Exactly right. Once your license is active and you're ready to file and pay TPT, that's when you sign in on AZTaxes.gov as a business. The JT-1 and all the lookup tables during the application phase live on the ADOR side.
0 coins
Zane Hernandez
I made the mistake of going to AZTaxes.gov first when I was doing my JT-1 and kept getting confused why I couldn't find the application there. Spent 20 minutes clicking around before someone told me the form itself is on the ADOR site.
0 coins
Genevieve Cavalier
One thing that tripped me up was thinking the city code was optional — like maybe ADOR would just figure it out from my address. Nope, they want you to specify it, and if you pick the wrong city's code your TPT filings could get applied to the wrong jurisdiction. Spent a couple weeks sorting out a mismatch on mine. Not a fun conversation with Customer Care.
0 coins
Zoey Bianchi
AuthorThat's a little alarming honestly. I'll be very deliberate about which code I pick.
0 coins
Genevieve Cavalier
The good news is the codes list on the ADOR site is pretty clear once you find it — it's just finding it that's the first obstacle.
0 coins
Ethan Scott
Can confirm it's not optional. Had a business owner I know skip it thinking it would auto-populate and the application came back incomplete. ADOR needs both the classification code and the city location code filled in.
0 coins
Lola Perez
My understanding was that the $12 state license fee ADOR charges covers just the state piece, and then the cities collect their own fees or have their own processes — but I might be getting that mixed up. Anyone know if Gilbert has a separate city license fee beyond the state TPT license?
0 coins
Cassandra Moon
The $12 per location is the state fee ADOR charges for the TPT license. Cities do have their own licensing fees and requirements, and those vary. For Gilbert specifically, that question goes to the city itself, not to ADOR — ADOR handles the state side. The JT-1 covers both the state code and the city codes but the city's own business license is a separate matter from the ADOR TPT license.
0 coins
Lola Perez
Ah, I had assumed the JT-1 covered everything — good to know the city may have its own step too.
0 coins
Zoey Bianchi
AuthorDidn't realize I might need to do something with Gilbert separately on top of the JT-1. Something else to look into.
0 coins
Nathaniel Stewart
ADOR's Customer Care line is (602) 255-3381, or if you're not in the Phoenix area the toll-free number is (800) 352-4090. They can answer city code questions for the JT-1 directly and tell you if your Gilbert selection looks right. Monday through Friday 7 a.m. to 6 p.m. Arizona time, and also the second and fourth Saturdays of the month 8 a.m. to noon.
0 coins
Zoey Bianchi
AuthorSaving those hours. I'll try to call before I submit the application just to confirm.
0 coins
Riya Sharma
The Saturday hours are genuinely useful — didn't know about the second and fourth Saturdays until recently. Shorter hold times in my experience on those mornings.
0 coins
Santiago Diaz
Payment plan on my ADOR balance got set up last month and I had a question about whether my next installment date had shifted after I made an extra payment. Phoned Customer Care several times and kept hitting a long wait. Tried Claimyr on a Friday afternoon and ended up talking to a representative who pulled up the payment plan on my account and confirmed the monthly amount and the exact next due date. That settled the question immediately. On your TPT question — the city location codes section on the JT-1 is worth reading slowly line by line, it's more intuitive than it first looks.
0 coins
Zoey Bianchi
AuthorGood to know about the layout being more intuitive. I think I was overthinking it.
0 coins
Riya Sharma
Payment plans and TPT licenses are both in the ADOR system but totally separate processes — glad you got your installment question answered. I had wondered whether an extra payment would change the schedule.
0 coins
Santiago Diaz
The representative said the monthly amount on record was unchanged and gave me the next due date. Exactly what I needed.
0 coins
Millie Long
Something I had wrong before: I thought the city code on the JT-1 was just for record-keeping and wouldn't actually affect how much I owed. The person above who mentioned mismatches explained it better than I'd understood — it determines which city's rate gets applied to your TPT filings. So getting it right on the application matters from the start.
0 coins
Genevieve Cavalier
Yep, that's what I found out the hard way. It's not just a label — it ties your filings to a specific jurisdiction.
0 coins
Millie Long
Wish I had understood that before I rushed through the form the first time. Had to contact Customer Care to get the classification sorted and that took time I didn't want to spend.
0 coins
KaiEsmeralda
Retail businesses in Arizona dealing with TPT basically have three codes to keep straight: the state classification code for what you sell, the state location code, and then the city code. The JT-1 walks you through each but if you're not expecting three separate fields it's easy to miss one or put a number in the wrong box. The ADOR site's instructions for the JT-1 are worth printing out and going through section by section.
0 coins
Zoey Bianchi
AuthorPrinting those instructions out is a good call — I've been trying to do it all on screen and I keep losing my place.
0 coins
KaiEsmeralda
Printed version also helps because you can mark off each field as you go. The city code section was the third page when I did mine and by that point I was going fast and that's where I made my mistake.
0 coins
Aurora St.Pierre
Three separate fields that look similar and are right next to each other is exactly where people go wrong. Slow down at that section specifically.
0 coins
Debra Bai
Called Customer Care this past week about my amended Form 140X from earlier this year and ended up asking about city location codes on the side since my spouse and I are also getting ready to open a craft store. The representative couldn't pull up my JT-1 application since it wasn't on the account yet, but they told me to look at the codes list on the ADOR site and to call back once the JT-1 was submitted if I had questions about the status.
0 coins
Zoey Bianchi
AuthorSo once the JT-1 is submitted they can look it up. Good to know there's a way to check on it after I send it in.
0 coins
Debra Bai
Right, they said to ask where the application stands once ADOR has it in the system. They couldn't see anything about it before submission though.
0 coins
Gabriel Freeman
Had filed a Form 140X earlier in the year and wasn't sure ADOR had received it. Tried Customer Care's line a few times without getting through. Used Claimyr on a Thursday morning and reached a representative who confirmed ADOR had received the amended return and gave me the date it was logged. That was all I needed — just wanted to know it wasn't sitting in a pile somewhere unread. On the JT-1 city code question, the ADOR site's TPT section lists Gilbert and every other Arizona city with their codes — it's a table, not a search bar, so just scroll to the G section.
0 coins
Zoey Bianchi
AuthorScrolling to the G section — that's exactly the kind of practical tip I needed. I was searching the page by typing and kept not finding it.
0 coins
Gabriel Freeman
The table doesn't always respond well to in-page search depending on how the browser handles it. Scroll and find the alphabetical section, it's faster.
0 coins
Laura Lopez
I did the same thing on the browser search and got confused. Scrolling through the table is the move.
0 coins
Victoria Brown
Letter from ADOR showed up about my TPT account last fall — no explanation of what it was asking me to do, just a reference number. Tried phoning Customer Care twice that week without reaching anyone. Tried Claimyr the third time and ended up talking to a representative who found the letter on my account, confirmed the date it was mailed, and told me to respond the way the letter itself directed. At that point I actually read the letter more carefully and it did have instructions I'd missed. On the city codes list — make sure you're on the current version of the list since it does get updated when cities change their codes.
0 coins
Zoey Bianchi
AuthorChecking for a current version of the list — hadn't thought of that. Good point.
0 coins
Victoria Brown
The date on the page usually shows the last update. If it looks old it's worth calling Customer Care to confirm before you submit the JT-1.
0 coins
Nathaniel Stewart
ADOR updates the codes list when a city changes its code or a new city adds TPT. It doesn't happen constantly but it does happen, and submitting with an outdated code can create a headache later.
0 coins
Samuel Robinson
Assumed the city code was just the city's ZIP code when I did my first JT-1 — it is not. It's a numeric code specific to ADOR's TPT system and it's on the list on ADOR's site. ZIP codes have nothing to do with it.
0 coins
Zoey Bianchi
AuthorI was about to ask if it was related to ZIP codes. Good to know it's completely separate.
0 coins
Samuel Robinson
Different person I talked to in a local business group made the same assumption. The confusion is real but the codes are on the list and each city only has one.
0 coins
Zane Hernandez
Dropped my JT-1 at the ADOR drop box at 1600 West Monroe Street, Phoenix, AZ 85007 instead of mailing it, since I was going to be near downtown Phoenix anyway. The drop box was fine. I know you can also submit online and that's probably easier if you're in Gilbert and don't want to drive in.
0 coins
Zoey Bianchi
AuthorGood to know there's a drop box option. I'll probably just go the online route since I'm already partway through it online.
0 coins
Zane Hernandez
Online is faster in my experience. The drop box was just convenient that one time for me. Either way works.
0 coins
Jayden Reed
Didn't know they had a drop box. That would have saved me a postage trip last time I had to mail something to ADOR.
0 coins
Eli Wang
Business opened with the wrong city code on the TPT license and fixing it required a corrected application and several weeks of back-and-forth with ADOR. Take the extra five minutes to confirm you have the right one before submitting. The Customer Care line is worth the hold if it spares you that correction process later.
0 coins
Zoey Bianchi
AuthorSeveral weeks of back-and-forth sounds like a nightmare. I'm going to triple-check the code before I hit submit.
0 coins
Eli Wang
The representative eventually got it corrected but I had to hold off on opening until the new license arrived. Timing matters when you have a lease already running.
0 coins
Ethan Scott
Quick sanity check on something: the person who mentioned that the license certificate can't be printed online — does that mean ADOR only mails it to the address on the JT-1? What if that address changes between when you apply and when it arrives?
0 coins
Grace Johnson
You'd want to contact Customer Care to update the address on the application if it changes before the license is mailed. ADOR mails to the address they have on file, so if that changes you'd need to let them know.
0 coins
Ethan Scott
Makes sense, I'll make sure the address on my JT-1 is correct from the start to avoid the issue entirely.
0 coins
Riya Sharma
A lot of people opening a first retail business in Arizona don't realize there's a difference between the TPT license ADOR issues and the local business license the city of Gilbert may require separately. The JT-1 and ADOR's TPT license cover the state side. Gilbert may have its own business registration requirements. Worth checking with Gilbert directly in addition to finishing the JT-1.
0 coins
Zoey Bianchi
AuthorSo there could be two separate things — the ADOR TPT license and whatever Gilbert requires. I'll look into Gilbert's side too.
0 coins
Lola Perez
This is the part that caught me off guard when I opened my place — I thought the ADOR license was all I needed and then found out the city had its own step. Not complicated, just an extra thing.
0 coins
Riya Sharma
The two processes are independent of each other. Finishing the JT-1 doesn't mean you're done with the city, and vice versa.
0 coins
Laura Lopez
Have been following this thread while doing my own JT-1 for a pottery studio. Ended up finding the Gilbert city code on the ADOR list pretty easily once I went to the right section. The table format someone mentioned is accurate — it's listed alphabetically by city name. Gilbert shows up right where you'd expect it.
0 coins
Zoey Bianchi
AuthorPottery studio sounds like a great business. And glad to hear the list was findable — feeling better about this now.
0 coins
Laura Lopez
The JT-1 is intimidating at first but once you're in the right section it moves fast. Good luck with the shop.
0 coins
Aurora St.Pierre
Finished my own JT-1 last week. The section asking for department of revenue city location codes sales tax was the part I nearly skipped over assuming it would populate automatically from my business address. It doesn't. You have to enter the code manually from the list. ADOR has no way of knowing which city you're in just from an address entry in the form — the code is what tells their system where to apply the tax.
0 coins
Zoey Bianchi
AuthorThat manual entry requirement makes sense now that you explain it, but I never would have assumed it needed to be me who entered it. Good heads-up.
0 coins
Cassandra Moon
Auto-population would be a reasonable expectation, and ADOR's form doesn't do it. The code is a deliberate selection the applicant makes.
0 coins
Aurora St.Pierre
Spent ten minutes looking for a way to search my address and have the code appear. Eventually gave up and just found it in the table, which took about thirty seconds.
0 coins
Zoey Bianchi
Update from the original poster: I found the Gilbert city code on the ADOR list — took about two minutes once I knew to look in the alphabetical table rather than search the page. Filled in the classification code for retail, the city code for Gilbert, and submitted the JT-1. ADOR confirmed receipt. Now I'm waiting on the license certificate to arrive in the mail. Customer Care said to contact them if I have questions about where the application stands. Thanks everyone — this thread answered every question I had about the city location codes section.
0 coins
Christopher Morgan
Good result. The wait for the certificate is the slow part — keep the confirmation number from the application handy so Customer Care can look it up quickly if you need to check on it.
0 coins
Eli Wang
Congrats on getting the JT-1 submitted. The city code section is behind you, and the rest of TPT filing on AZTaxes.gov after the license arrives is pretty straightforward once you're set up.
0 coins