Washington State FMLA

CommunityGovernment Services

Can't reach Washington State FMLA? Claimyr calls for you, so you don't have to wait on hold.

Claimyr is a pay-as-you-go service. We do not charge a recurring subscription.

Using Claimyr will:

  • Connect you to a human agent at the ESD
  • Skip the long phone menu
  • Call the correct department
  • Redial until on hold
  • Forward a call to your phone with reduced hold time
  • Give you free callbacks if the ESD drops your call
Fox KTVUABC 7CBSSan Francisco Chronicle


Ask the community...

  • DO post questions about your issues.
  • DO answer questions and support each other.
  • DO post tips & tricks to help folks.
  • DO NOT post call problems here - there is a support tab at the top for that :)

Sage 50 paid family leave payroll deduction formula — how does it actually work?

Been trying to set up the Washington PFML deduction correctly in Sage 50 and I'm going in circles. My employer switched payroll software earlier this year and whoever set it up before me didn't document anything. I know the deduction comes out of employee paychecks and there's an employer portion too depending on company size, but Sage 50 keeps asking me to enter a formula and I honestly don't know if what I had before was right. To make it worse, I'm also on leave myself right now — took medical leave last month after a surgery — so I'm trying to sort this out remotely while also dealing with my own claim. My Paid Leave account shows Approved and I already filed two weekly claims, but I want to make sure the deduction on my own paystubs was always calculated right before I left, because now I'm second-guessing everything. Has anyone set up the Washington Paid Leave payroll deduction in Sage 50 specifically? Or if you know the right formula structure for the PFML deduction I'd appreciate any help figuring out what numbers to plug in.

For what it's worth, I ran into an issue where the PFML deduction in our payroll system had been correct for a couple of years and then someone did a software update and the formula field got reset to zero. We didn't catch it for two pay periods. If you're maintaining a Sage 50 setup, putting a step in your payroll checklist to verify the PFML line actually appears on a sample paystub after any software update is worth doing.

0 coins

The reset happened silently — the deduction line just showed $0 and nobody noticed until someone asked why their paystub looked different. Now we spot-check three sample paystubs right after any update goes in.

0 coins

Silent formula resets after software updates are common with payroll platforms. Having a one-page checklist of deductions that should appear and their approximate range for a typical pay period is a simple way to catch it fast.

0 coins

Coming back to the original question about Sage 50 specifically — if you haven't already, the state's employer account on Paid Leave's site shows the premium rates and wage base in a format that's easy to match against what you enter into the software. Some employers find it easier to build the formula by going to that resource first rather than trying to reverse-engineer from an old paystub.

0 coins

Going to the state's employer resources first rather than reverse-engineering was the approach I ended up taking this morning after reading through this thread. Had the current rate up in one tab and the Sage 50 formula screen in the other — much cleaner than guessing.

0 coins

Exactly the right way to do it. The rate page also makes clear which wages count and which are excluded from the premium base, which matters if your employees have things like tips or reimbursements in their gross pay.

0 coins

What is the problem with paid family leave act in Washington — trying to understand why my claim keeps stalling

Okay so I've been going back and forth on this for weeks now and I need to figure out what I'm actually dealing with. I had a hernia repair in early October and my doctor said six weeks off minimum. I filed for medical leave through Washington's Paid Leave program thinking it would be pretty straightforward — uploaded my certification form, proof of ID, everything the site listed. That was day one of my leave. My account says In Review and has said that for going on 11 days. I haven't gotten any letter, haven't gotten any message in my account asking me for more documents. Meanwhile my paycheck obviously isn't coming in and I have rent due in two weeks. I keep reading stuff about the 30-day window to apply and I know I'm within that, but I have no idea if I actually did everything right or if something is missing that they just haven't told me about. The bigger confusion I have is whether this is even the right program. My HR department keeps calling it 'Washington FMLA' and my coworker told me to look up the 'paid family leave act.' I genuinely cannot tell if what I applied for — through SecureAccess Washington, the Paid Leave account — is the same thing my coworker was describing or something different. Is the problem with paid family leave act just that it's hard to understand, or is my claim actually stuck? Anyone who's been through this, please help.

For anyone who gets denied — and I say this because it happened to me on my first attempt for intermittent leave after knee surgery — read the denial letter word for word. Mine said the documentation was insufficient and I initially assumed it was the whole form. It was actually one specific section my doctor had left blank. Took the certification form back to the orthopedist's office, got the missing section filled in, uploaded the corrected form under Manage Documents in the account, and filed a request for review. Came back approved. The process works if you follow it; it's just not obvious from the outside.

0 coins

The denial letter tells you the specific reason. Address exactly that in your review — don't add extra things unless they're relevant. Keep it targeted.

0 coins

Went through the same exact thing with an incomplete certification. Reuploaded the corrected version and the review came back approved within a couple weeks. The request for review form in the account is pretty simple to fill out.

0 coins

What happens if you go back to work before your leave period is up? Do you have to cancel everything or can you just stop filing weekly claims?

0 coins

That's simpler than I thought. So if the doctor clears me early I don't have to call anyone, just stop submitting?

0 coins

If you do end up working the same number of hours as your typical workweek that week, the weekly claim will come back as not payable, which is fine — it's just the system reflecting that you worked a full week. You could also just not file for weeks you fully returned.

0 coins

Does a teacher contract prevents paid family leave from being used?

I'm a first-year teacher in a public school district here in Washington and I'm expecting in late January. I went to HR last week to start figuring out my leave options and the HR coordinator told me that because I signed a contract at the start of the school year, I'm essentially locked into working the full term and that the contract 'limits my ability' to take paid family leave. She wasn't totally specific about what that meant — whether she meant I couldn't take it at all, or just that the district had its own rules about how it would work alongside my Paid Leave benefits. I've been paying into Washington PFML on every paycheck since September and I can see the deductions on my stubs. I do have more than 820 hours worked this year counting summers, so I believe I qualify. What I need to know is whether a school district employment contract can actually block me from using Washington Paid Leave for the birth of my baby and to bond afterward. HR made it sound like the contract overrides everything but that doesn't sound right to me. Has anyone dealt with this in a school district or any other job where the employer tried to use a contract to prevent you from taking leave?

There is one thing worth knowing about the FMLA and Paid Leave running together. Starting this year the district can count your FMLA leave toward your Paid Leave job protection period, but they have to tell you in writing if they're doing that. It doesn't reduce your actual weekly Paid Leave payments at all — it only matters for the job protection side. If the district does this without written notice to you, that's their problem.

0 coins

Many districts will run them concurrently automatically and send you the written notice. If they don't mention it, ask HR in writing whether they plan to designate your leave as FMLA as well. Having it in writing protects you either way.

0 coins

Even if both run at the same time, the Paid Leave weekly benefit is unchanged. The only impact is on the job protection calculation if you're in a smaller district that counts days very carefully.

0 coins

HR is not the final word on any of this. If you believe the district interfered with your right to take Paid Leave or retaliated against you for applying, there's an Unlawful Acts Complaint Form you can file with the department. That option existing is worth knowing about even if you never need it.

0 coins

You can also reach out to the Office of the Paid Family and Medical Leave Ombuds — they're independent from ESD and help workers navigate disputes with the department or their employer. Their line is 844-395-6697.

0 coins

Filed a complaint through that Ombuds office last year about a different issue and they were actually useful — they contacted the district directly on my behalf and things resolved faster than if I'd kept going in circles with HR alone.

0 coins

Does paid family leave July 5 count as a valid start date, or does the claim week shift?

My dad had a stroke in late June and I took time off work starting July 5 to stay with him at the rehab facility. I had no idea how any of this worked when I first called in, and my job was understanding but I knew I needed to get the leave pay figured out fast. I went online and found out about Washington's Paid Family and Medical Leave program, made a SAW account, and got my application in. The thing tripping me up is that July 5 is a Saturday, which is the last day of a Paid Leave claim week before a new one starts on Sunday. So technically my first real week of leave was the week of July 6. I reported July 5 as my leave start date on the application because that's when I stopped going in, but now I'm second-guessing whether it matters. Did I do this right? Does starting on a Saturday affect anything, like the waiting week or how many weeks I can claim? My dad's care situation is going to last months so I really want to get this set up correctly from the start.

Secure messages in the Paid Leave account are where any requests for more information will land for online applicants. I went three days thinking my application was fine before I noticed a message in the Message Center asking me to upload a clearer version of my proof of ID. Had I not checked the account directly, I would have missed it entirely.

0 coins

Paid Leave's site says they reach out by secure message if they have questions, so if your status has been In Review for a while, that inbox is the first place to look before assuming something is wrong.

0 coins

I'll make it a habit to check the Message Center every couple of days. I've been watching the status but hadn't thought to actively monitor messages.

0 coins

Tracking how the July 5 start date plays out in your weekly claims will make the most sense once you file that first claim. The week of June 29 through July 5 is likely your waiting week — file it, report July 5 as a day you missed work (and the hours missed in a row), and move on to the week of July 6 through July 12 as your first potentially paid week. Each subsequent week gets filed the same way.

0 coins

The weekly claim walks you through each question one at a time — did you work, how many hours, did you miss four or more hours in a row, did you use any paid time off. It's methodical and not as overwhelming as it sounds.

0 coins

This is exactly the step-by-step walkthrough I needed. July 5 as the final day of the waiting week, then July 6 begins the first week that could actually pay. I feel a lot clearer on this now. Thank you all.

0 coins

Washington paid family medical leave website down — can't file my weekly claim

Okay so I've been trying to log in to my Paid Leave account since yesterday morning and I keep getting an error page. The SAW login goes through fine but then when it tries to load my claim dashboard it just spins and then times out. I have a weekly claim due and I don't want to miss the window. This is for my medical leave — I had a procedure about three weeks ago and I'm still recovering. The status flipped to Approved about ten days back and I've been filing weekly claims no problem until now. Is the website down paid family medical leave side only or is it SAW that's broken? Anyone else getting this? I'm worried if I can't file my weekly claim it's going to mess up my payment timing. Do I lose out if the site is down and I can't file on time?

Went through two separate outages during my own family leave last year — one was SAW, one was Paid Leave's dashboard specifically. Both resolved within 24 hours. Neither affected my payment schedule because I filed as soon as access came back. The 3 to 5 business day payment window just starts from whenever the weekly claim is approved, not from a fixed day.

0 coins

Exactly — the payment clock starts at claim approval, so a day or two filing delay just shifts when the payment arrives, it doesn't cancel it.

0 coins

Had two back-to-back weeks approved on the same day once and both payments hit within that 3 to 5 day window. The processing handles them in sequence.

0 coins

Fingers crossed the site comes back up for you soon. When it does: log in, go to your claim, file the week, report your hours worked and any paid time off used, confirm you missed at least 4 hours in a row, and submit. The whole thing takes about three minutes once you're in.

0 coins

The hours missed question catches people off guard the first time. You need 4 hours in a row, not just 4 total scattered through the week. If you're out full weeks it's a non-issue but good to know.

0 coins

Also keep any paid time off you used separate in your head — vacation, sick, holiday — because the weekly claim asks how many hours of that you used too, and it can reduce what you're paid if it pushes your total hours up near your typical workweek number.

0 coins

Prev1...56789...43Next