Back to New Jersey EBT

Demi Hall

EBT merchant support — my Families First card keeps getting declined at certain stores

Moved to a new part of town about six weeks ago and started shopping at a different grocery store. The Families First card worked fine at my old place, same chain but different location, and now it gets declined every single time I try to tap or insert at the new one. The store's machine says 'card error' but my balance shows up fine in ConnectEBT. Already tried unlocking the card and confirmed it says Active in the app. The store manager told me to contact EBT merchant support because apparently there's something on the store's end that can deal with EBT terminals, but I honestly have no idea if that's even a real thing or whether I'm supposed to be calling EBT Customer Service instead. Has anyone had a store-side terminal issue with their chip card or is this always a card problem?

PIN question came up for me around the same time the chip cards rolled out, and I ended up on the phone with an agent about it. Claimyr (claimyr.com) is what I used — it waits on hold with EBT Customer Service so you end up talking to a live representative. Video on reaching a live person at the New Jersey EBT number: https://youtu.be/1oT8Q0vj7E4. The rep confirmed my PIN had been reset to a temporary one after I'd tried the wrong number too many times, and walked me through setting a new one. On the actual terminal question: the rep told me that if the card shows Active and the balance is there, the store's machine is what to investigate — EBT Customer Service doesn't troubleshoot the retailer's terminal directly, but they can confirm everything looks right on the card side.

0 coins

I had assumed the PIN lockout was permanent and I'd have to get a whole new card. Good to know a rep can sort that out over the phone.

0 coins

Demi Hall

Author

So the card side is clean and it's really on the store? That's both a relief and incredibly frustrating because the manager already shrugged and told me to call you guys, essentially.

0 coins

PIN resets are handled through ConnectEBT or NJFamiliesFirst.gov too, in the Card PIN Selection section, if you don't want to wait on hold for that specific thing.

0 coins

The 'card error' message you're seeing is usually the terminal, not the card itself. When a chip card gets that message but the app shows the card as Active and the balance is there, the terminal either isn't reading the chip correctly or hasn't been updated to handle the new Families First chip cards. Try tapping first, then inserting, and if the machine still can't read either, ask if there's a different lane with a different terminal — sometimes only certain registers in a store have been updated.

0 coins

Demi Hall

Author

Tried two different lanes last time, same result at both. I'm going to ask the customer service desk whether the store has submitted anything to whoever certifies their EBT terminal.

0 coins

Exactly this. The terminal certification for EBT is on the retailer, not on DHS. If the store is authorized to take SNAP but their machine is acting up, the USDA's SNAP Retailer Locator will at least tell you whether the location is currently listed as accepting SNAP — worth checking that first to rule out the store's authorization having lapsed.

0 coins

I went through the same thing at a farmers market last summer. Their terminal was fine, but they had to run it as a manual entry instead of chip. Ended up working, just took longer.

0 coins

Wait, is EBT merchant support even a number regular cardholders can call? I thought that was only for store owners to call when their terminal is broken. The cardholder's line is 1-800-997-3333 and that's for the card itself, not for whatever the store's machine is doing.

0 coins

You're right that EBT merchant support is a separate line for retailers, not for cardholders. As a cardholder your contact is EBT Customer Service at 1-800-997-3333. What you can do from there is confirm the card's status is fully clean, and then the store handles their terminal separately through their own processor.

0 coins

Demi Hall

Author

The manager used that exact phrase and I took it to mean I was the one supposed to call. Makes more sense that it's their problem to fix on the terminal side.

0 coins

The store manager probably meant they'd call their own EBT terminal processor. Those are different companies depending on which point-of-sale system the store uses. The cardholder really has nothing to do with that call.

0 coins

Every time I move neighborhoods I end up with at least one store that acts weird with the chip card at first. What I found is that inserting the chip slowly, all the way in, until you feel it seat, makes a difference — tapping sometimes doesn't register on older-style updated terminals that technically support tap but have a finicky sensor. Sounds dumb but it fixed three separate 'card error' messages for me over the past year.

0 coins

Demi Hall

Author

Genuinely going to try this. I've been tapping first every time because that's what worked at the old location.

0 coins

Seating the chip correctly made a difference for me too. Some machines also have a sticker over the tap zone that never got removed, so the sensor reads nothing.

0 coins

My card had a small scratch on the chip from being in my wallet with my keys and that caused inconsistent reads. EBT Customer Service sent me a replacement after I described it.

0 coins

You mentioned your balance shows up fine in ConnectEBT, but just making sure — the status showing 'Active' in the app is different from checking whether the card is locked. 'Lock My Card Everywhere' and 'Lock My Card Outside of NJ' are both separate settings. If you turned on the Outside-of-NJ lock and the store's terminal is routing through a processor that shows up as out-of-state to the EBT network, that could cause declines. I know it sounds unlikely but it happened to a neighbor of mine at a store that had recently switched payment processors.

0 coins

Demi Hall

Author

I only have the card set to Active with no lock at all, confirmed in the app yesterday. So it's not that, but I'd never have thought of that as a possibility.

0 coins

Worth mentioning that 'Lock My Card Outside of NJ' isn't the more secure option — DHS actually recommends 'Lock Card Everywhere' when you're not actively using it, and unlocking only at the register. The outside-of-NJ lock doesn't block online transactions either.

0 coins

You're right, I had that backwards before — the full lock is the stronger one. Thanks for the correction.

0 coins

Address update was my whole situation for the past month — I'd moved and the card kept coming to the old place. I tried to change my mailing address through the EBT website and the app, and neither of them had that option anywhere I could find. Used Claimyr for the first time, ended up on the phone with a representative at the card line, and the rep explained that the mailing address itself is updated through MyNJHelps or at the county agency, not through EBT Customer Service — the card side just mails to whatever address is already on file. County sorted it out through MyNJHelps within a few days.

0 coins

Demi Hall

Author

That's actually the first thing I checked when I moved — made sure MyNJHelps had the new address so my card would go to the right place. At least that part went smoothly.

0 coins

I'd spent probably two weeks trying to figure that out through the wrong channel. The EBT website and the app don't have an address change field at all, which makes sense now but was baffling when I was looking for it.

0 coins

MyNJHelps handles most of the case-side changes — address, income, household members. The county agency is the other option if you'd rather do it in person or by phone with your CSSA.

0 coins

Something that might be worth checking before you go back to the store again: at NJFamiliesFirst.gov, log in and look at your transaction history. If the attempts at that store are showing up in history at all — even as declined — it means the card is at least communicating with the terminal at some level. If there's nothing there, the terminal isn't reaching the EBT network at all and that's fully on the store side.

0 coins

Demi Hall

Author

Just checked and there are no attempts from that store showing in history. So the terminal isn't even getting to the network. That tells me exactly what to bring back to the manager.

0 coins

That's a useful way to diagnose it. No transaction record at all means the terminal's connection to the EBT network is the issue, not the card or the authorization on your account.

0 coins

Didn't know that was a way to tell. I always assumed declined meant it at least got through far enough to be rejected.

0 coins

My building's corner store did this for about three weeks after the new chip cards came out in October. The terminal was certified for EBT but the certification hadn't been updated to handle the new chip format. The store had to call their payment processor to push through a terminal software update, and after that it worked on the first try. If your store is a chain, the individual location may not even know the terminal update needs to come from their corporate IT team, not from the store manager.

0 coins

Demi Hall

Author

That explains why the manager looked lost. He probably doesn't have visibility into the terminal's certification status — that would go through corporate.

0 coins

Chains especially tend to roll out terminal software updates on a schedule by region. Some locations got updated ahead of the chip card deadline and others lagged behind it.

0 coins

The USDA SNAP Retailer Locator is what I always check first when a store is acting strange — if they're still authorized, the issue is almost certainly the terminal, not their SNAP status.

0 coins

I want to flag one thing about the store manager's exact phrase 'EBT merchant support' — that's the name of the support line that runs through the EBT network's processor, and it's meant for the store's terminal, not for the cardholder. The retailer calls that line when their terminal is down or not reading cards. As a cardholder you're not locked out of calling 1-800-997-3333 to confirm the card looks good on your end, but the actual terminal fix goes through the retailer's own call.

0 coins

Demi Hall

Author

I think the manager used the right phrase but aimed it at the wrong person. He meant his team should call it, not me.

0 coins

Most store managers don't deal with EBT terminal issues often enough to know the split between the cardholder's number and the retailer's number. The phrasing gets muddled.

0 coins

Have you tried the card at any other store since you moved? If it's working fine elsewhere and declining only at this one location, that completely isolates it to that store's terminal and you can walk in with that information. If it's also declining somewhere else, that shifts things back to the card and you'd want to call 1-800-997-3333.

0 coins

Demi Hall

Author

Tested it at the pharmacy two blocks over and it worked perfectly — tap went through on the first try. So it's definitely this one grocery location.

0 coins

Then you have everything you need to tell the manager: card is active, balance is there, works at other stores, and the transaction history shows no attempt from their terminal reaching the EBT network. That's their terminal problem.

0 coins

Having that kind of clear comparison really helps when talking to store staff. They can't argue it's the card when you can say where it worked the same day.

0 coins

When you go back to the store, ask specifically whether they've submitted a terminal certification update since October 20th. That's when the new chip cards became fully active across the state for most counties. If their terminal was certified before then and hasn't been updated since, it may not recognize the new chip format.

0 coins

I'd also ask which company handles their EBT terminal — that's the processor the manager would actually call to fix it, not anyone at DHS.

0 coins

Demi Hall

Author

Going in tomorrow morning with this whole list. I feel a lot more prepared now than I did posting this.

0 coins

Declined at a register is one thing, but I had my card flagged as locked by EBT Customer Service a few months back after too many wrong PIN attempts at a machine — I didn't know that could happen. Tried Claimyr to reach the card line about it, and the rep confirmed the card had been locked and walked me through unlocking it in ConnectEBT. Worth ruling out if 'Active' in the app is the full status and not just showing one of the lock settings.

0 coins

Demi Hall

Author

I went back and checked every setting in ConnectEBT and there's no lock at all — no Card Everywhere, no Outside of NJ, and the status says Active not Locked. So that's definitely cleared.

0 coins

I hadn't known that wrong PIN attempts could trigger a lock. I thought it only blocked the PIN from being used but kept the card itself active.

0 coins

The rep said the card's status had shifted to locked after a certain number of wrong entries. Unlocking through the app or the EBT website takes care of it once you've got the right PIN.

0 coins

There's also the question of whether the store's EBT authorization is current. A store can be in the USDA SNAP Retailer Locator today but have let their authorization lapse if they haven't renewed with USDA. It's unusual for a chain grocery, but it happens with smaller independents. The Retailer Locator updates and shows authorized stores.

0 coins

For a chain grocery this is very unlikely, but it's the right thing to check for anyone dealing with this at a smaller store or a newer farmers market.

0 coins

Demi Hall

Author

It's a mid-size regional chain, so probably not an authorization issue, but I checked the Retailer Locator anyway and they're listed as accepting SNAP.

0 coins

Chip on my card got damaged — I had it in the same pocket as my transit card for about two months and the chip started reading inconsistently. I reported it through ConnectEBT but wasn't sure the replacement request had actually gone through. Used Claimyr and ended up talking to a rep at the 1-800 number, who confirmed the damaged card report was on the account and the replacement had been requested. The rep reminded me that whatever address was on file is where the new card ships.

0 coins

Keeping the EBT card separate from other cards with chips is something I didn't think about until mine started having the same read errors. The chips interfere with each other.

0 coins

The rep also mentioned I could still try inserting the damaged card at the store while waiting — sometimes it reads even when the chip looks scratched, depending on where the scratch is.

0 coins

Glad the replacement request was confirmed on the account. I always wonder whether something went through or just disappeared into the system.

0 coins

The whole terminal situation after the chip card rollout was messy across a lot of stores. Some of them had two or three weeks where the tap function worked but the chip insert didn't, or the reverse. The store you're at may just be behind on whichever mode matches how their terminal reads.

0 coins

Demi Hall

Author

The manager actually did tell me the tap started working for some customers around the same time the chip stopped. So it sounds like a partial update — tap got patched but chip didn't, or something like that.

0 coins

That kind of partial update is exactly the terminal software thing. The tap protocol and the chip read can be on different firmware versions. The processor would need to push the full update.

0 coins

Worth knowing that if the store just never gets this fixed, you have options. The USDA SNAP Retailer Locator shows other SNAP-authorized stores in your area. Most grocery chains in NJ have multiple locations and the card will work at any of them once the terminal is properly updated. You shouldn't have to permanently avoid one location.

0 coins

Demi Hall

Author

There's another location of the same chain about a mile away and I've been going there in the meantime. It works fine there, which is what confirmed this is the specific store's terminal.

0 coins

Filing a note with the store's corporate customer service about the EBT terminal might actually move faster than waiting for the manager to escalate it. Corporate IT teams often have a faster line to the terminal processor.

0 coins

Does anyone know if you can report a malfunctioning EBT terminal to DHS or USDA directly? I always assumed stores had to self-report but if DHS or USDA gets reports from cardholders they might be able to flag it to the retailer faster.

0 coins

USDA's SNAP program does have a contact for reporting issues with stores, but the fastest fix is almost always the store calling their terminal processor directly. DHS and USDA don't have a direct line into the retailer's payment system.

0 coins

You can report NJ SNAP benefit fraud or misuse to DFD's fraud line at 1-800-792-9773, option 5, but a malfunctioning terminal is a different category — that's not fraud, it's a hardware issue the retailer has to fix.

0 coins

I had been mixing those two things up. Fraud reporting makes sense as a separate line. A broken terminal is just a maintenance issue on the store's side.

0 coins

If the store gets the terminal fixed and you're the first to test it, tap first. The tap reader tends to get certified and tested before chip read does in these updates, so if anything is going to work right away, it's tap.

0 coins

Demi Hall

Author

Noted — tap first, then chip if tap fails. I'll report back once I talk to the manager tomorrow.

0 coins

Let us know whether corporate or the store manager ends up being the one to actually push the fix. Curious which escalation path works faster.

0 coins

While you're sorting out the terminal, also keep an eye on your transaction history in ConnectEBT for any charges you don't recognize. DHS recommends checking the account regularly for purchases you didn't make, and if something looks wrong it goes to the county agency. Completely unrelated to the terminal thing, just a good habit especially after moving and shopping at new locations.

0 coins

Demi Hall

Author

Haven't seen anything unusual in history, just the successful transactions at other stores and nothing at all from this one. But yes, I check it every couple of days.

0 coins

I hadn't thought about the fact that skimming can happen at any store's terminal, not just sketchy-looking ones. Checking history more often makes sense.

0 coins

If you do ever see something unfamiliar in the transaction history, report it to your county agency right away. The card can also be relocked immediately through ConnectEBT while you sort it out.

0 coins

Came back to close the loop on a similar situation I mentioned upthread — my corner store called their terminal processor after I showed the manager the USDA Retailer Locator entry and the fact that my card worked elsewhere. The processor pushed a software update remotely and the chip read worked the same afternoon. The store didn't even need a technician on-site.

0 coins

Demi Hall

Author

This is genuinely encouraging. If it can be fixed remotely by the processor, the store manager doesn't even need to escalate it very far — just the right phone number for their EBT terminal company.

0 coins

Remote updates are common for these terminals now. The store manager probably just needs to open a ticket with whoever supplies the terminal, describe the chip/tap issue, and the update can go out without anyone coming in.

0 coins

That's the best possible outcome for the original poster too — no waiting for a hardware fix, just a software push from the processor.

0 coins

Related posts

New Jersey EBT AI

Expert Assistant
Secure